The concrete truck made its first of two visits to pour the Loggia slab. Here we can see the unfinished concrete waiting to be worked:
And the finished result:
Category: construction photos
construction photos
Week 123 (The QR)
While progress continues all around the site, one topic that’s been getting a huge amount of attention lately has been the wiring plan and the audio eQuipment Room (which we call the QR). Here is an overview (literally) of the QR:
Here’s what it looks like down on earth:
Week 122 (Loggia Slab Prep)
The Loggia is getting close to being another finished part of the construction project. Here we see the rebar and steel screens laid on top of foam that will insulate our slab from the geothermal sink known to most as Earth:
Here’s a detail of a corner of what will become the slab. Note that the slab is reinforced in 3 dimensions, as it should be:
Week 121 (Annex Floor)
The concrete Annex floor was poured, tooled, and sealed this week. The results speak for themselves:
This finished surface will forever reflect the underlying logic of the design. The look is richly organic:
Week 120 (Control Room Framing, Part 3)
As I explained in last week’s update, the angles in any control room are unlike any angles one expects to find in normal framing carpentry. And our Control Room design has more interesting angles than most. This week we established the endpoints of the most unique framing in the project, the intersection of a sloped front wall meeting angled side walls that both intersect a ceiling that is itself both pitched and rotated. There is no steel square in the world that tells you how to measure or make those cuts. In fact, even locating where in space these different planes all intersect is a math problem unto itself. Here is the solution given in wood:
To learn how we figured this out (and about more construction progress), read on…
Week 119 (Control Room Framing, Part 2)
Progress framing the Control Room continues apace. We started here:
And by the end of the week, we wound up here:
I don’t even know where to begin describing all the many details visible in this view, but I’ll try…
Week 118 (Control Room Framing, Part 1)
Three years ago I decided to embark on my first from-the-ground-up construction project: an ideal space for recording, mixing, producing, and experiencing music. This is what the space looked like at about that time:
Two years ago, the Control Room was just an outline of some concrete blocks surrounding some dirt and conduits:
One year ago the Control Room remained a concrete outline while the East and West walls of the Music Room rose to the 14th course:
Six months ago the Control Room masonry was finished:
Three months ago the Control Room rafters were placed:
This month—this week—the framing of the Control Room finally began!
With so much preparation and anticipation, you can be sure we want to do it right! We are off to a very good start…
Week 117 (Loggia Roof Wrapped Up)
Last week we saw the placement of the Loggia Roof rafters. This week the rafters were sheathed with plywood and the roof framing was finished, including the extensive and finely finished soffit lookouts. Here we are midway through the sheathing process:
And even closer to half-way, the sheathing is trimmed flush to the ridge beam:
Week 116 (Loggia Roof Framing)
The last piece of the roof framing puzzle is now falling into place, with the last steel framing members making their way across the Loggia Columns:
It won’t be long before the other framing members are placed and that last remaining part of the roof is sheathed and shingled!
Week 115 (Progress in Utility Room)
We had a gorgeous week weather-wise, and progress has continued across all aspects of the project. The following photo of our radiant heating manifold shows why I’m choosing to highlight the Utility Room progress this week:
Here is that manifold in a bit more context:
Manifold Recording / The Miraverse 
You must be logged in to post a comment.